In nearly all situations, most individuals spend quite a lot of money purchasing their forklift. Thus, it is really important to take proper care of it so as to protect your investment well into the long run. It is a good idea to know the procedures which are carried out during taking care of and maintaining this machinery.
Amongst the best ways to tell how good the engine is working is by starting the lift truck up and listening closely to see how it runs. Like for example, if there are any knocks or misses, the machine is defective and this must raise some issues. Also listen carefully for any squealing noise which come from the belts because these sounds will provide you with a lot of information.
When carrying out maintenance, some of the main components you would need to pay attention to comprise the horn, safety warning devices, the lights, the gauges and the overhead guard. Any faulty parts or burnt out light bulbs should be replaced as soon as they are noticed. It is also imperative to check the wiring.
After the above parts have been checked carefully, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Every cell of the battery must be checked so as to make sure that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and after that change the filters. The fuel filters, hydraulic filter and the transmission filter must be regularly replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
When the oil change has been done and new filters have been fitted, visually check the drive axle from underneath the equipment. Be certain to grease the axle if there is any grease fitting. Check the engine belts for any frays or cracks. If you find any, fix the problem accordingly. Then, inspect each and every other component of the machine including the wheels. If any type of fault or issue is detected, be certain to deal with it immediately in order to make sure the equipment is running at its safest and optimum levels.